Skip to content
Call 501-514-0090

Trim

Metal Trim & Custom Trim

Trim is what makes a metal roof or wall weathertight and finished. It closes the edges, covers the transitions and directs water where it needs to go. WarHammer Metal supplies standard trim and fabricates custom trim for the details that standard pieces do not cover.

Request a quoteAll products
Schematic drawing of the general profile type. Actual profiles vary.

Overview

What does metal trim do?

Most metal roof and wall projects use a familiar set of standard trim pieces at the eaves, rakes, ridges, valleys, walls and corners. When a project has a detail that standard trim does not fit, such as an unusual roof transition, a parapet cap, a window or door condition, or an existing profile you need to match, custom-fabricated trim fills the gap.

For custom work, send a drawing with dimensions, a sketch with measurements, or a sample piece. We will review it and follow up with a quote.

Common standard trim pieces

  • Eave and drip edge
  • Rake and gable trim
  • Ridge and hip caps
  • Valleys
  • Sidewall and endwall flashing
  • Inside and outside corners
  • J-channel and window and door trim
  • Base trim and transitions

Characteristics

Key characteristics.

  • Standard trim

    Common pieces for metal roofing and siding, available alongside your panel order.

  • Custom-fabricated trim

    Trim formed to your profile for details that standard pieces do not fit.

  • Works from your detail

    Send a drawing, a measured sketch or a sample piece, and we will work from that.

  • One supplier for panels and trim

    Order panels and the trim that finishes them from the same place.

Requesting a quote

What to include.

The more of this you can send, the faster we can confirm options and price your order.
Request a quote
  1. 01For custom trim, a profile drawing or sketch with every dimension and angle marked
  2. 02Or a sample piece of the trim you need to match
  3. 03Lengths and quantity of each piece
  4. 04Preferred color or finish
  5. 05The panel the trim will be used with

Questions

Common questions.

Can you match trim on an existing building?

Often, yes. Bring a sample piece or send a detailed drawing with dimensions and angles, and we will tell you whether we can reproduce it.

What information do you need for a custom trim quote?

A drawing or sketch showing every leg length and bend angle, the color or finish, the length of each piece and how many you need. Noting which side is the finished face helps avoid mistakes.

Related products

Often used together.

Need trim? Tell us about the project.

Send your project details, measurements or drawings, and we’ll follow up with product options and a quote.

Request a quote

Or reach us directly at 501-514-0090 or steve@warhammermetal.com